Wheels

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 70w 26-inch rims

- Colored rim decal kits to personalize your ride - Decals to fit 2 100w 26-inch rims

- Colored rim decal kits to personalize your ride - Decals to fit two (2) 50w 27.5+ rims

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applicarions - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 622 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Width ID: 27 - Width OD: 32 - Profile: 29 - Weight: 440g - ERD: 578 Downhill: - Width ID: 32 - Width OD: 38 - Profile: 31 - Weight: 500 - ERD: 584 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 390g - ERD: 587

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

- Aluminum hubs - Sealed bearing - Black - 6-bolt disc rotor

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - 20mm Thru Axle with 15mm option, 6 bolt disc compatible

Replacement axle sets for use with Origin8 FB-2000 hubs Front Axle: - 3/8 x 26 x 135 x 175 Rear Axle: - 3/8 x 26 x 170 x 210

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable. - Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers) - Plug has O-ring retention – no tool required

- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

- Aluminum hubs - Sealed bearing - Nutted - Use: Rear - Gears: Flip-flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed

- Heat-treated axle for improved strength - Angled Flanges for lateral stability in wheel building - Rear hubs include a 4-Pawl Cassette body with 9-tooth driver - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Spacing / Axle: 14mm - Material: Alloy - Drilling: 48

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Front - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Rear - Gears: Flip/flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm

- Aluminum hubs - Sealed bearing - Nutted - Use: Rear 110mm - Driver: Singlespeed cassette w/12T cog and lockring - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed - Drilling: 36

- Front/Rear: Rear - OLD: 175mm

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring

Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm

- Includes 9T Micro drive cog - Use: Rear - Driver: Singlespeed cassette w/9T cog and lockring - Drilling: 36H - Axle: Nutted 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Loose

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

The CADEX 36 Disc WheelSystem is a versatile, lightweight composite wheel built for real-world performance. Featuring a hookless rim design with optimal 22.4mm internal width and 36mm depth, it delivers unbeatable acceleration and climbing efficiency as well as confident handling on descents, in the wind and on varied terrain. - Precision reinforced lay-up places carbon fiber only where needed, creating a strong, stiff rim structure weighing in at only 1302 grams. - Dynamic Balanced Lacing technology produces a stiffer, more efficient wheel with outstanding power transfer. - High tensile strength CADEX aero carbon spokes minimize lateral flex for more efficient acceleration and climbing. - The 22.4mm inner rim width creates an increased actual tire contact patch for better traction and impact absorption, better handling, more confidence and less rider fatigue. - CADEX hookless rim technology features a broad inner rim width and durable continuous carbon fiber structure, helping create a rounder tire shape for superior grip and handling plus added sidewall support when cornering, all without compromising weight. - The precision machined low-friction R1-C30 hub significantly reduces bearing load as CADEX ceramic bearings further increase efficiency by offering lower rolling resistance and 1.5x smoother action than steel. - A low 36mm rim profile offers excellent stability in shifting winds.

Champion 2.0 Black Spokes - One 264mm spoke = 7g

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Carbon fiber consctruction using continuously running fibers throughout the rim, tapering laminates, and removing excess material - 28mm front and 32mm rear rim depths provide crosswind stability and flatland aerodynamic efficiency to descend confidently and carry speed in the flat valleys between climbs - Hookless bead tubeless technology reduces weight, improves comfort, maintains strength, and ensures an exacting rim bead seat - Premium Road Hubs bring efficiency, longevity, and simplicity: Cold-forged and machined 6061 alloy for durable lightweight performance - Tubeless and disc brake only

• Replacement aluminum quick release skewers

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

• 5mm skewer set (F+R hubs) • Standard 5mm Hex release • Black or Silver anodized finish • Chromoly axles

- Variable widths - Left: 35mm - Center: 52mm - Right: 40.5mm - Length: 127.5mm - Overall: 148.5mm

Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

- Variable widths - Left: 32mm - Center: 52mm - Right: 35mm - Length: 119mm - Overall: 140mm

- Type: Skewer only - Length: 220mm

Replacement clear plastic spoke guard.

- Shell: 8mm flanged axle nut - Flanged

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Valve: Schrader - Tire Type: Clincher - Rear Axle: QR x 135mm

WHY WE MAKE THIS Originally, we made this hub to be the cornerstone of our hub product line. It was one of those product releases where we put all our hub and bearing experience into, and ended up with a hub that struck that perfect balance between weight, performance, durability and looks. Since the advent of disc brakes (and the R45D), we keep making it, because it’s still that cornerstone hub, and so many of our riders still love to rock their rim brakes on road and off. WHY YOU WANT IT The R45 front hub is lighter and more aerodynamic than most built-to-last hubs on the market. Our R45 rear hub combines a redesigned RingDrive™ system with 45 teeth for lower drag and near-instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our R45 Hub Service Tool - Available with Shiamano/Sram HG or Sram XDR driveshell - Available in 28h and 32h - Ceramic bearing upgrade available HUB SPECIFICATIONS - Axle Width: 130mm - Flange Diameter DS & NDS: 51mm - Center to Flange DS: 17mm - Center to Flange NDS: 34.3mm

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).